Close sidebar

Krupal Prabhakar Pawar

  • Nashik, Maharashtra, India
  • Process Improvement, Process Modeling, Process Optimization
Profile Snapshot
Krupal is based out of Nashik & has studied ME-Mechanical Engineering, Mecánica from Year 2012-2015 in SSGMCE-Shri Sant Gajanan Maharaj College of Engineering, Shivaji University.
Krupal Prabhakar Pawar is Skilled in Process Improvement, Process Modeling, Process Optimization and other talents.
About
Mr. Krupal Prabhakar Pawar is a Research Scholar (Regd.No.SSSME1514) of Shri Satya Sai University of Technology and Medical Sciences, Sehore, Madhya Pradesh (M.P).He has completed Master of Engineering (ME) in Mechanical Engineering (Advance Manufacturing and Mechanical Systems Design) from Shri Gajanan Maharaj College of Engineering, Shegaon, Dist.-Buldhana in 2015.He has completed Bachelor of Engineering (BE) from R.C.Patel Institute of Technology, Shirpur, Dist.-Dhule in 2010. He has two year
Work Experience
Assistant Professor
Brahma Valley College of Engineering and Research Institute
Full Time Jun-2017 To present (7 years 10 months)
Responsibilities
  • [1] Departmental Project Co-ordinator and Guide. [2] Departmental Exam Co-ordinator (OR/TW/PR), 2017-18. [3] Internal Senior Supervisor, Nov./Dec.2017 University Exam.
Assistant Professor
Sharadchandra Pawar College of Engineering,Otur
Full Time Aug-2015 To Jun-2017 (1 year 10 months)
Responsibilities
  • [1] Departmental Project Co-ordinator and Guide. [2] Departmental Exam Co-ordinator (OR/TW/PR),2015-16. [3] College Level Convocation Ceremony Management Committee Member,2015. [4] Class Teacher of Second Year Engineering,2016. [5] F.E/S.E Online Practice Exam Co-ordinator (My Examo Software),2016. [6] Workshop Superintendent,2016. [7] F.E Co-ordinator, 2016. [8] An ISO 9001:2015 Work Committee Member. [9] Internal Senior Supervisor May 2017 University Exam. [10] Departmental NAAC Co-ordinator,2017 [11] FC Member,2017
Lectuer in Mechanical Department
Anuradha Engineering College,Chikhli
Full Time Jun-2013 To Aug-2015 (2 years 2 months)
Responsibilities
  • [1] Paper Presentation Event Co-ordinator in National Conference, 2015. [2] National Conference Registration Committee Member, 2015.[3] Industrial Visit Incharge, 2015.
Junior Production Officer
Indian Tools Ltd.
Full Time Aug-2011 To Aug-2012 (1 year )
Responsibilities
  • 1. Maintaining ‘5s’ in Machine Shop 2. Production and Process Management 3. Machine Setting and Train to Worker 4. In-process Inspection 5. R & D Activities
Graduate Trainee Engineer
Akar Tools Ltd
Internships Oct-2010 To Aug-2011 (10 months)
Responsibilities
  • 1. Man Power Handling for Blanking Section 2. Material Planning 4. Maintaining Quality of Blank 5. Maintain ‘5s’ in Forging Section

» 3 Projects

: Multi-response Optimization, Analysis and Modeling for CNC Turning Operation for AISI M2 Tool Steel
Jun-2015 to present
Guide Details: Dr.G.R.Selokar, Professor and Registrar, SSSUTMS, Sehore, M.P. Work Details: In present research work, the response factors such as cutting force, vibration, and surface roughness are going to investigate for the hard turning of AISI M2 Tool Steel. This research work is sponsored by Birla Precision Technologies Tools Ltd. Nashik.
Analysis and Optimization of CNC Turning Parameters for High Speed Steel (M2)
Jun-2014 to Apr-2015
Guide Details: Dr.R.D.Palhade, Professor and ME Co-ordinator, S.S.G.M.C.E, Shegaon. ME Project Details: M.E project sponsored by Indian Tools Ltd. Nashik.The duration of project was 29/06/2014 to 1/02/2015.The project aim was to improve Productivity and Quality of CNC turning operation for High Speed Steel (M2) using Taguchi’s Method and ANOVA. Conclusions of Project Work: • For simultaneous optimization of surface roughness (Ra) and material removal rate (MRR) nose radius is the most significant parameter affecting the performance followed by the feed rate. • The recommended levels of CNC turning parameters when multi-response characteristics (MRR and Ra) considered are cutting speed = 300 m/min, feed rate = 0.15 mm/rev, depth of cut = 0.75mm and insert nose radius = 1.2mm.
Microcontroller Based Thread Cutting Machine Automation
Jun-2009 to Apr-2010
Guide Details: Prof.K.A.Saner, Assistant Professor, R.C.P.I.T., Shirpur. Conclusions of Project Work: • The internal as well as external threading on metal bars and pipes can be done easily with help of microcontroller based thread cutting automation. • The reduction in time for starting the production and also it gives high productivity, high accuracy and reduction in operational fatigue.
Education
Mecánica, Mechanical Engineering
Shri Sant Gajanan Maharaj College of EngineeringShivaji University
2012-2015 | Score 81%
1. No. of Research Paper Published through UGC approved International Journal: 10 ,2. No. of Research Paper Published through National Journal: 00 ,3. No. of Research Paper Published through International Conference: 02 ,4. No. of Research Paper Published through National Conference: 02 ,5. No. of Books/E-Book Published: 02
Extra-Curricular Interests
  • Research Reading and Writing
  • Science Friction Book Reading
  • Badminton
Want to contact Krupal ?
Youth4work © 2022