Close sidebar

Ankit Sarvaiya

Sr. Engineer - Design & Application Engineering - Working With Hvac Field, Total Experience Of 3Years & 10 Months In Automotive R&D
  • Ahmedabad, Gujarat, India
  • HVAC, Mechanical Engineering, Product Design
Profile Snapshot
Ankit is based out of Ahmedabad & has studied Operations, PGDBM-Post Graduate Diploma in Business Management from Year 2013-2017 in SCDL-Symbiosis Centre for Distance Learning, Symbiosis University.
Ankit Sarvaiya is Skilled in HVAC, Mechanical Engineering, Product Design and other talents.
About
a) Equipment/Product Design - HVAC, Automotive
b) Project Documentation – DQ/IQ, BOQ, BOM
c) Project Sales, Business Development
d) Customer Inquiry, Quotation, Purchase Order, Client Interaction, Order Finalization, Client Follow-ups
Work Experience
Sr. Engineer - Design & Application Engineer
Chemietron Clean Tech Pvt Ltd
Full Time Aug-2015 To present (9 years 8 months)
Responsibilities
  • a) Equipments/Product Design (based on Application & Customer requirements)
    b) Project Layout Design – Equipment Selection, Ducting Layout, Air Filter Design & Selection
    c) Project Documentation – DQ/IQ, BOQ, BOM
    d) Project Sales, Business Development
    e) Customer Inquiry, Quotation, Purchase Order, Client Interaction, Order Finalization, Client Follow-ups
    f) Project Engineer
Achievements
  • Project –
    1) Design to Commissioning for the hospital clean room to reducing the infection, contamination, increased result with more than 15 to 20% compare to existing due to this concept.
R&D Engineer (Product Design)
Setco Automotive Limited
Full Time Sep-2014 To Aug-2015 (11 months)
Responsibilities
  • • Product Designing & Development
    • New Product Development.
    • Responsible for the LCV Clutch (Ø200 Dia clutch).
    • Performing Fatigue Life Analysis of the Clutch using the Endurance & Performance testing lab.
    • Product Performance parameter comparison with the benchmarking samples.
    • Customer queries, Prototype samples
Executive Design Engineer (Product Design)
ABC Bearings Limited
Full Time Dec-2011 To Sep-2014 (2 years 9 months)
Responsibilities
  • • Product Designing & Development, NPD also.
    • Performing Fatigue Life Analysis of commercial bearings with Manual Calculation.
    • Accountable for Domestic projects including LCV, HCV, Tractor & Industrial Application.
    • Responsible for investigating Contact Stress and damage threshold of bearings used LCV, HCV, Tractor & Industrial Application.
    • Ensuring optimum utilization of bearings also performing design changes coinciding with the desired applications.
    • Efficiently handled various key customers like TML, AAM, FML, AMW etc.
    • Press Force Calculation, Durability Calculation (Stress Distribution, Contact Pressure etc.)& bearings analysis.
Achievements
  • Title: Calculation on Life modification Factor
    Tenure: April’14
    Brief: In the design part we have done the analysis and validation in the validation lab and form that we have decided that bearings are running 1.5 times of its desired L10 life so on the basic of that we have calculate the new life factor for the dynamic load rating. This new life factor is considered as our design factor so we can get more load rating for design.

    Title: Planetary Gear Box Cylindrical Bearings life
    Tenure: January’14 - Febuary’14
    Brief: CRB has been failed on the onsite validation so on the basis of that data we have arrange the all data and photographs and calculate the loads on each bearing and after that done the calculation, form that data I have made some changes in design, after that again validation and it was successful.

» 3 Projects

Calculation on Life modification Factor
Executive Design Engineer (Product Design) at ABC Bearings Limited
Mar-2014 to Jul-2014
In the design part we have done the analysis and validation in the validation lab and form that we have decided that bearings are running 1.5 times of its desired L10 life so on the basic of that we have calculate the new life factor for the dynamic load rating. This new life factor is considered as our design factor so we can get more load rating for design.
Planetary Gear Box Cylindrical Bearings life
Executive Design Engineer (Product Design) at ABC Bearings Limited
Jan-2014 to Mar-2014
CRB has been failed on the onsite validation so on the basis of that data we have arrange the all data and photographs and calculate the loads on each bearing and after that done the calculation, form that data I have made some changes in design, after that again validation and it was successful.
Kinematic Mounting Scheme of Miniature Precision Elements for Mission Survivability against Externally Imposed Environmental Conditions
Student at UVPCE-U V Patel College of Engineering
Aug-2010 to Nov-2011
? This dissertation work concentrates on design & development of mount for successful operation of optical element. Nominal design condition to condition with potential misalignment that could occur during the launch or during the operational life in Space orbit was considered for the design & development.
Education
Post Graduate Diploma in Business Management
Symbiosis Centre for Distance LearningSymbiosis University
2013-2017
Master of Engineering or Technology
U V Patel College of EngineeringGanpat University
2009-2011 | Score 70%
Project Work has been completed in ISRO
Bachelor of Engineering or Technology
Shantilal Shah Engineering CollegeBhavnagar University
2005-2009 | Score 67%
Blogs & Portfolio
Portfolio
Kinematic Mounting Scheme of Miniature Precision El...
This dissertation work concentrates on design development of mount for successful operation of optical element. Nominal design condition to condition with potential m...
  • Ankit Sarvaiya
  • 02 May, 2015
  • 25
  • 0
READ MORE
Extra-Curricular Interests
  • Wondering
  • TV
  • Reading Novels
yKnown
Want to contact Ankit ?
Youth4work © 2022